This is a replacement from Nagao Electronics Ultra. Ultra's cord itself is good, but I replaced it with NGK's because it is too tight unless the insertion angle is 90-degrees. I use it for Utani SP-IICoil, but it was easy to install.
View Detail
- Instock
8.61 EUR (1,487 JPY) 13.9 EUR Save 38%
Webike Point: +15 pt
(0.08 EUR)
levering Informatie
In Stock, Ships within 24 hours.
Estimated arrival date around
Beschrijving van het product hieronder wordt automatisch vertaald door Google.
Product detail
kabelkleur : rood
kapkleur : rood
Kapvorm : L type (Rubber schimmel geïntegreerde type terminal)
kabellengte : 50cm
* Het beeld is alleen ter referentie. De getoonde afbeelding kan afwijken van de werkelijkheid.
De kabel en de dop zijn gemaakt van siliconen voor betrouwbaar rijden..
Bovendien realiseert de speciale waterdichte structuur een uitstekende weerbestendigheid en spanningsbestendigheid zonder elektrische lekkage..
Bovendien is er een keramische weerstand in de dop ingebouwd, die een hoog geluidspreventief effect heeft..
*Het wordt aanbevolen om alle stekkers te vervangen bij het verwisselen van.
*Het beeld is alleen bedoeld als referentie..
Voorzichtigheid
* If there may be an instruction manual included, it will be written in Japanese.
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
New arrivals in used
New arrivals in used
klanten-reviews
Reviews with image
Feb 20, 2021
Высоковольтный кабель высокого качества
Отличный высоковольтный кабель, покупался для Suzuki ZZ на замену штатному, прекрасно работает, свечной колпачок для под толстый наконечник свечи, ничего не нужно откручивать и при этом появляется надежная фиксация свечи в колпачке, производитель заявляет лучшую производительность, и, наверное, данный кабель актуален при использовании спортивного коммутатора----------------------------------------------------------Excellent high-voltage cable, bought for Suzuki ZZ to replace the stock, works well, the spark plug cap to a thick tip candles, do not need anything to unscrew and thus there is a reliable fixation of the candle in the cap, the manufacturer claims better performance, and, probably, this cable is relevant when using sport switchPowered by Google Translator
View DetailHelpful?
Apr 8, 2019
Made by NGK, the trustworthy company
I installed it in KSR-2 Normally, when installing to KSR-2, OEMCable removes it from the Ignition coil It is necessary to use a joint to install it because it is not possible, but because it is mentally unsatisfactory, the TZR2 It is combined with 50ROEM (3XV) and the Ignition coil for 3XV The cable connection is screw type and can be separated It is better to cut the cable to an appropriate length when you install it After the installation, the starting performance of the kick is better and the appearance of the race ish is better than anything else It will be
View DetailHelpful?
Installed on: HONDA MSX125 (GROM)
Aug 16, 2018
high quality material used for the cable and cap.very easy to mount,ideal for replacing old worn out cable.very fast delivery to Belgium with economy mail (9 days).
View DetailHelpful?
Sep 18, 2017
Replace the OEM cord because it is badly cured due to deterioration.
it is normal.
Since the code and Ignition coil are high in the part setting of the OEM Parts Number,
It is helpful to purchase only code and Cap.
Coil / There seems to be some people thinking that code can not be removed from Cap,
It is only screwed into the wood screw shaped protrusion, so it can be pulled out by turning it in the normal screw direction.
Helpful?
New Custom Articles
