- About quality and texture, I can confirm that the quality is great and that the materials used are aluminum for the oil cooler, banjo fittings and oil tappet cover and steel for the mounting bracket. ...Lees verder
- My Grom is a Normal engine, but when I buzz it in the summer, the oil temperature exceeds 130 degrees Celsius.The oil temperature rose even after running uphill endlessly on a gentle uphill.We thought...Lees verder
- Looks awesome, didn't work with the Kitaco neo, it makes it too close to the fender and it hit the cooler, I recomend the high mount for this, the rubber bushings also don't last very long, they...Lees verder
- * About quality and texture, Large 5 row highly efficient aluminium oil cooler, anodized aluminium banjo bolts and fitting, nylon braided oil hose and machined aluminium tappet covers with mounting br...Lees verder
- * About quality and texture, The main components of the kit is the light weight aluminium 3 row oil cooler and the silver billet tappet covers that all match up great with the Monkey 125 engine.
* Ab...Lees verder - I bought this to improve the cooling effect as I am doing Bore up. The price is reasonable and the manufacturer is reliable, so I'm glad I bought it.Lees verder
- Because it is 50cc, I thought it was not necessary, but I put High Camshaft in the high compression Piston, and use it for prevention because I use a variety of high rotation, and it cools well in sum...Lees verder
- The temperature sensor attached to the drain bolt of the Engine But I think it was a good idea to put it on because the temperature is lowered by about 5 degrees Since the capacity is large, Clearance...Lees verder
- easy to installation just made sure all screw fitting tight and no oily,keep running temperature cool and more engine power!Lees verder
- It is a change from GCraft's 7th stage Oil cooler to 85cc of KITACO.GCraft's installation was easy, but the oil temperature was at most -5 ° C to -8 ° C.I recently changed to Oit cooler of KIT...Lees verder
- The oil temperature increased due to Ksr 100 Bore up, so I installed it. If you cut the Shroud part with Cutter, etc. and direct the wind to the Oil cooler, it becomes easy to cool down. Installation ...Lees verder
- Bore up LITTLE CUBFI and do it at the time of break-in. While traveling on a long uphill slopeI got a cuddle and scratched Cylinder and Piston.I did not have Gold to buy a new Cylinder piston, so do n...Lees verder
- When used simultaneously with Bikers' Brake hose guide, Full Bottom at RightCurve touches the fins of OIL cooler. (I touched it) CoreCenter 1 / About 3 fins collapsed. Fortunately there is no leak...Lees verder
- Simultaneous with Clutch cover of company. Screw seems to be licking with regulation Torque. Lock tite painted and tightened slightly weaker than prescribed Torque. Like a somewhat OIL cooler, I will ...Lees verder
- I am wearing it for this summerBecause Clutch cover is KITACO, it is the same ManufacturerI was unable to install according to the Instruction Manual, so I installed the Bracket back and forthBecause ...Lees verder
- This very nice quality oil cooler kit. Fitment is perfect as usual with Kitaco brand. Everything is already included for install. The design of the bracket is very nice as it has rubber bushings so t...Lees verder
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING