- YZF-R25 2023 MODEL has been converted to YZF-R25 2023 MODEL.resultEmboiling was surprisingly less noticeable and felt better blowing up from low to mid to high RPM. The mid to high RPM surface whitene...Lees verder
- I installed it on my GSX1300R HAYABUSA, and the engine braking is now mild and easier to drive. However, I feel that the brake is used more than before.Lees verder
- This is a high-end Internal Pressure Control Valve with a Level that has been banned for additional installation in the Race since 2013.The product and installation cost is expensive, and the cleaning...Lees verder
- Installed on 17CBR1000RRSP (Supported Kit)I installed the 1st and 2nd gear in the hope that the electronic brake control would intervene better when breaking from mid to high RPM and that the 2nd and ...Lees verder
- I installed the product because of the product's claims, but as a layman, I could not tell the difference.Is it the Brush-bo effect?Cost-effectiveness is, well.......................Lees verder
- Acceleration and deceleration became smoother and easier to ride.I think it is less tiring than NORMAL both in town and Touring.I have high throttle and it has made low speed Corner, Blip Ping, and Ac...Lees verder
- Engine braking works properly.It's so much easier to ride.The installation was done by Motorcycle Shop.He said it was really Large strange.I don't know how durable it is yet.Lees verder
- It's not as different as the Gold amount you pay, and it's almost as effective as just stopping secondary Air.If you are going to use it, I think just the one that connects to the Blowby hose would be...Lees verder
- Emboiling will be weaker and less jerky, 1.2.3 speed will be easier to handle,Installation requires removal of Cowl, Tank, and AirCleaner,The installation site is small and installation will take time...Lees verder
- The MC51 in NORMAL is quite strong in emblems, and the Shock when Downshifted I wanted to do something about it and came across this productI had a Parts dealer do the installation because it looked l...Lees verder
- I still only have a town ride, but the feeling of embreliness at low speed has been improved like a lie. In addition, the feeling of Throttle's sticking from normal traveling disappeared and it be...Lees verder
- Initially we installed the T - REV of STD and was not satisfied so we later upgraded it to α system looking for further decompression effect.As a result it was somewhat okay?. As it is, Emble is MildI...Lees verder
- The rise in the high revolution range has improved significantly.It became comfortable to reach the Red zone.In addition, the vibration becomes smaller in the full revolution area, and it seems that t...Lees verder
- I have been interested in decompression Valve for a long time and was considering including products from other companies.Regarding purchase, other people 's imp are changed to Large change refere...Lees verder
- The installation itself was about 1 hour as it was designed by car model. Even if you cut Hose at the position as described, there is no problem, but if you cut it after aligning the spot, it is strai...Lees verder
- Before installation it was quite troubled with donkei?. Because I changed the motorcycle, I thought it would be fine if I got accustomed for a while, but I did not resolve it unnoticed, but consulting...Lees verder
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING