Installation is perfect for the OEM Product
Geplaatst Jan 1, 2019
Door
Japan User(translated) (197576)
Van
There are no details on how to install it and I installed it based on blogs and other sources
The mounting hang of the spring is to hook the spring to the STAND and the motorcycleBody Then you can fix the bolts of the STAND afterwards
The spring has a high spring multiplier and it is impossible to install it later without tools or an amateur
After the spring is installed, you can take a stick like a driver from the Right Side of the STAND Pulling the STAND backwards from the Left Side, you can pull it through the Bolt We're going
Pointing the Bolt with the Right hand while pulling the STAND backwards works well
If there are two workers, ask them to hold the STAND and pull it backwards, the work will be more efficient It is
All you need is a tool, but you'll need to apply grease between the STAND and the Bolt If you can get it from Amazon or other sources, it's perfect
The exhaust pipe is in the way and it is difficult to bend it well It's difficult
You don't have to bend it completely to pull it out, so if you bend both tips, that's fine
The mounting hang of the spring is to hook the spring to the STAND and the motorcycleBody Then you can fix the bolts of the STAND afterwards
The spring has a high spring multiplier and it is impossible to install it later without tools or an amateur
After the spring is installed, you can take a stick like a driver from the Right Side of the STAND Pulling the STAND backwards from the Left Side, you can pull it through the Bolt We're going
Pointing the Bolt with the Right hand while pulling the STAND backwards works well
If there are two workers, ask them to hold the STAND and pull it backwards, the work will be more efficient It is
All you need is a tool, but you'll need to apply grease between the STAND and the Bolt If you can get it from Amazon or other sources, it's perfect
The exhaust pipe is in the way and it is difficult to bend it well It's difficult
You don't have to bend it completely to pull it out, so if you bend both tips, that's fine
- The Plate indentations are thicker than the OEM Chain and seem to be more durable than the OEM.I bought it expecting the whole Black, but PlatePin is a color like Gun meta near Black.The ChainGrease t...Lees verder
- Because it is a hard pad, it is hot in summer because only the pad part has zero ventilation. On the other hand, in winter, hot air does not escape only from the pad part.The Mesh is not dented, so it...Lees verder
Past bij:- BETA RR4 T 125 LC MOTARD 10-
- BETA RR4 T 125 LC 10-
- BETA RR4 T 125 10-
- BETA RR50 Factory 13-
- BETA RR4 T 08- All Displacement
- ...en meer.
It is made of thick Carbon and the quality is the best.But the truth is that I bought it because I had no other choice.It's just an exterior Parts, so you want to save your Gold if you can.It would be...Lees verder- Past bij:
- YAMAHA FZR1000 91 3GM5.7 3LG3
I bought my copy in 2006, so I received the Presto version of the image, but when the bookPage "Publication date:December 12, 2013 so I'm not sure if it was changed to Wise GEAR at this time.As shown ...Lees verder - Past bij:
- YAMAHA FZR1000 (3GM) 89-95
I bought it myself around 2006, and the cover says "Presto. It was written.FZr Series, including 250? "Poor acceleration at low speeds. I have solved the problem with the service manual here.I have be...Lees verder
?
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING