34.24 EUR
(5,580 JPY)
31.41 EUR
(5,119 JPY)
(8% OFF)
5 (8 alle Reviews)
Very Good
Easy to use[How is it used?
I bought this for my graduation from Hand Wrench.
I had a torque wrench to tighten the wheel nut etc., but I didn't have one for SmallTorque, so I chose this product which has a moderate setting range and is inexpensive.
Was the one you received as per Image?
I didn't expect much since it was inexpensive, but the texture is better than I expected and it comes in a plastic Hard case.
How was your experience with it?
Loosen the screw at the bottom and set Torque to Quantity.:Set and retighten to set the Torque without tools.
I felt that the Click feeling when it became the Torque which I set was sufficient. In a certain site, there was also a person who said that the Click feeling was too small, so there may be individual differences.
I think it's easy to use because you don't need to change batteries with Mechanical, and you can use it quickly and easily at any time.
In addition, I was a little disappointed that there was no Release of Socket. It might be unavoidable considering the price.
[Points to note]
There is nothing special about it. I think this Torque wrench is easy to use even for beginners.
How did it compare to other products?
Compared to the Large Torque wrench for Wheeletc. that I have, it is naturally lighter and easier to use.
But, as I wrote above, only the place where there is no Release of Socket was disappointing. (Because the one for Wheel has Release)
【Review】
This Torque wrench is moderately large and easy to use.
If I wanted, I could set up to 30N-m and if there was a release mechanism of Socket, it would have been a perfect score.
Reviews For E-Value Vooraf ingestelde momentsleutel From Other Webike User
Excellent
For tightening of Drain and PlugI have a SK11 Digital type, but I like the snap sound of Analog.
I was looking for a low Torque for tightening the Drain and Plug as per Title.
The main thing that attracted me was the colored text part, which made it easy to read.View Detail
Excellent
For MaintenanceTorque Management[How is it used?
I bought this for Torque management when installing Plug and Point coveretc.
Was the one you received as per Image?
The texture was better than I thought it would be.
How was your experience with it?
I have the impression that it is necessary and sufficient for what I am using.
[Points to note]
I think the Click sound is a little too small, so it's important to use it carefully.
How did it compare to other products?
I don't have another one, so I can't compare, but if you're an amateur using it for simple maintenance, I think it's a good choice because it's affordable.
Other items that would be helpful
Opinions and requests for Items/Manufacturer that should be purchased together
Socket etc. are not included and need to be purchased separately.View Detail
Excellent
I use it on the Plug socket of my Small diameter Plug.I bought this to manage the tightening torque of the Plug.
The Torque setting part is a little difficult, but once you set it up, the rest is easy.
It comes with a hard case to help you store your precision equipment.
I think this is the best Plug socket for Small diameter Plug.View Detail
Excellent
For Oil drain and Plug tighteningI have a SK11 Digital torque wrench, but even when I'm not using it, the battery drain there is
Intense.
The handle is short, making it difficult to apply force.
You can tell how tight it is even if you can't see the numbers on the LED Lamp, but this one physically sounds like a Snap.
There is no such thing as not being able to see the numbers.
I was worried because there was a post on one of the sites that the sound was so small that it was hard to understand the limit.
That's not true at all.
It's totally understandable because it's a SmallTorque and you have to tighten it carefully.
It's very easy to see that the numbers are colored with red, and that's the main reason why I chose this.
I also have a 20-220N.m one (other manufacturer) but the numbers are silver and hard to see.
The Torque wrench that I use the most is for Oil drain and Spark plug, so this Torque was enough for me.
I think that there are many people who say that the hand torque is enough, but I use it because the other party is aluminum. (I have experience in car service in the past.)
Especially for the Plug, the diameter has become thinner than in the past, and I'm afraid of managing the Torque.
My use range is 12N.m to 23N.m, so it is the best.
I am very happy with the Case.
I don't use it basically, but it's also good that it supports the reverse rotation Torque.
Digital is convenient though, because you don't have to set Tension back to 0 after use. (LOL)
9.Because it is 5sqSize, it is also convenient to use Socket as it is without conversion.View Detail
Most Viewed Reviews Of E-Value Instrumentation Tools
Average
Torque in Motorcycle Maintenance can almost coverLow Torque for Drain and Plug uses sister product ETR3-25.
I bought this because I liked it.
I don't know if this is an individual product issue, but when I set the Torque and Snap, the neck bends and the Torque is set back to Zero.
When I rotate the Body lever, it is stuck and will not turn.
It is unfortunate that it has to be turned once in the tightening direction before it can be loosened.
This is not the case with ETR3-25.
The Torque range is larger than that of ETR3-25, so the letters are written in detail and are difficult to read for the old eyes.View Detail
Excellent
For tightening of Drain and PlugI have a SK11 Digital type, but I like the snap sound of Analog.
I was looking for a low Torque for tightening the Drain and Plug as per Title.
The main thing that attracted me was the colored text part, which made it easy to read.View Detail
Average
It works just fine, but...I bought this as a spare for miscellaneous use.
It is easy to use, and once Dial is aligned and fixed, it is measured.
Same as a normal pre-set Torque wrench.
I compared the measurements to Snapon to see if they were off by a large amount.
I think it is an acceptable score since it is almost the same.
It was good in the initial stages, but durability is unknown.
Isn't Speed fast losing accuracy? I have a suspicion that
In the end, I ended up using only Snapon.
If you are thinking that you just need to be able to measure for reference purposes, it would be okay to buy one.View Detail
Excellent
For MaintenanceTorque Management[How is it used?
I bought this for Torque management when installing Plug and Point coveretc.
Was the one you received as per Image?
The texture was better than I thought it would be.
How was your experience with it?
I have the impression that it is necessary and sufficient for what I am using.
[Points to note]
I think the Click sound is a little too small, so it's important to use it carefully.
How did it compare to other products?
I don't have another one, so I can't compare, but if you're an amateur using it for simple maintenance, I think it's a good choice because it's affordable.
Other items that would be helpful
Opinions and requests for Items/Manufacturer that should be purchased together
Socket etc. are not included and need to be purchased separately.View Detail
Excellent
Much easier to use than I thought.I used it to fasten the screw when I changed the Disc Plate (Rotor) of Rear. I've never had to worry about Torque before. "That's about right. I've been doing this for about 40 years, but recently I've started to worry a little, probably because I'm getting older.
This is the first time I've bought a Torque wrench, and although I was worried about the price difference between several products, this one was the right choice for me. I'm glad to say that the width of the setting Torque is wide and it feels quite solid and trustworthy.
This time, I did Plate fastening with 30Nm. This is because it was mentioned in the Plate Instruction Manual of brembo that I bought. When the specified Torque is reached, the Head bends with a crunch. It's a little bit of a bend, but you can definitely feel it because it's clearly there and you can feel it.
But is the Torque correct? I'm sure there's a question about that, but there's no way to find out... but from my own experience so far... "That's about it. I think it's so-so right. (Sorry for the lazy comment)View Detail
Other Reviews From Japanese Webike user
Excellent
Radipon handled in Mild?attachment
The CBR650R is mounted at the same position angle as the NORMAL.
However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away.
I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose.
・NORMAL (Reserve integrated horizontal master) Impressions of
No complaints on public roads. Familiar feel and very easy to handle.
However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful.
Radipon (Reserve separate body portrait master) Impressions of
It was totally different from what I expected, my expectation was that it would feel like a Rear brake…
It is really a mild and easy-to-handle radipon.
On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN?
But I felt the radipon effect from Breaking a little stronger, and
It can be hung up to a hard brake without effort.
I felt trust that this could stop.View Detail
Very Good
packtalk bold Attached MountI purchased this for use with multiple Helmets. 。
Mount included with the BOLD.
Microphone and speaker are not included and must be purchased separately.View Detail
Excellent
Grip replacementGrip that had been used for a long time was worn out and had to be replaced.
They are soft and dampen vibration.View Detail
Very Good
Works well in everyday life[How is it used?
Used to lick Screw loose.
Was the one you received as per Image?
As per Image.
How was your experience with it?
When used on a strongly tightened Screw, it can be safely and securely removed.
The licked Screw was removed.
It is also useful for DIY Screw removal.
[Points to note]
When used on a licked Screw, it is best to beat it in with a Hammer before use.View Detail
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING