rook
materiaaleigenschappen : Polycarbonaat (Dikte 3mm)
formaat : Lengte 380mm x breedte 340mm
[set bevat].
Scherm X1
Spons X1
Dubbelzijdige tape X 1 stuk
Verzinkkap Schroef (M6X25mm) X2 st.
Verzinkkap Schroef (M6X20mm) X2 st.
U Moer X 4 st.
Vlakke wasmachine X4pcs
Rozetwasmachine X4pcs
Kussenrubber (2mm dikte) X2pcs
Rubber afstandhouder (driedimensionaal rubber) X2
*De afbeelding van de installatie is alleen bedoeld als referentie.
*Montagesteunen worden apart verkocht.
*CB1100 RS (SC65) 17: Afzonderlijk zijn de artikelnummers 61380 en 92322 vereist.
*De verblijf voor installatie is dezelfde specificatie als de conventionele Blast Barrier & Aero Visor voor de modellen die in de compatibiliteitstabel hiernaast staan vermeld. (Blast Barrier X kan worden geïnstalleerd op voertuigen die zijn uitgerust met Blast Barrier en Aero Visor zonder het verblijf te veranderen).
*Bij de installatie van het scherm moet u de stang en het scherm tijdelijk monteren, zodat er geen spanning op een deel van het scherm wordt uitgeoefend wanneer het op het voertuig wordt gemonteerd. (Als het scherm na de montage van het onderstel op het voertuig wordt geïnstalleerd, kan het beschadigd raken als gevolg van een te hoog koppel. Een borgmoer wordt gebruikt om te voorkomen dat de moer loskomt.
*Gebruik geen reinigingsmiddelen of waterafstotende middelen die oplosmiddelen bevatten, omdat deze het schermoppervlak kunnen beschadigen of scheuren.
*De straalbescherming en het garneringvlak (71540-71545) kunnen niet worden geïnstalleerd.
*Dit product wordt geleverd met een set kinderonderdelen die nodig zijn om de optionele autospecifieke houder aan de carrosserie van het voertuig te bevestigen.
smoke
Material: Polycarbonate (Thickness 3mm)
Size: Length 380mm x width 340mm
[Set components]
・Windshield x 1
・Sponge x 1
・Double-sided tape x 1pc
・Flat Cap Screw (M6 x 25mm) x 2pcs.
・Flat Cap Screw (M6 x 20mm) x 2pcs.
・U Nut x 4pcs.
・Flat Washer x 4pcs.
・Rosette Washer x 4pcs.
・Cushion rubber (2mm thickness) x 2pcs.
・Rubber spacer (three-dimensional rubber) x 2pcs.
*Approx. fitment for CB650R 2021 model (CB650RAM J 2BL-RH03).Must be installed with the model specific installation bracket (99238).
*Installation image is for reference only.
*Mounting brackets are sold separately.
*CB1100 RS (SC65) 17: Part numbers 61380 and 92322 are required.
*The bracket for installation is the same specification as the conventional Blast Barrier & Aero Visor for the models listed in the compatibility chart on the right.(It will not interfere with Blast Barrier or Aero Visor and no need to change the bracket.)
*When installing, temporarily assemble the bracket and windshield so that no stress is applied to any part of the windshield when it is mounted on the bike.(Also, be careful not to over-torque the windshield and bracket when tightening them to avoid damage.A lock nut is used to prevent the nut from loosening.
*Do not use cleaners or water repellents containing solvents, as they may damage the surface of the windshield or cause it to crack.
*Blast barrier and garnish face (71540-71545) cannot be installed.
*This product comes with a set of child parts necessary for attaching the optional vehicle specific bracket to the vehicle body.
*There may be changes in product specifications due to the manufacturer's reasons.