Boordiameter : 54mm
slag : 63.1 mm (normaal)
compressieverhouding : 11.2 : 1
*Wanneer de S-stage Bore Up Kit is geïnstalleerd, moet FI-CON TYPE-e (Injection Controller) tegelijkertijd worden geïnstalleerd.
*Omdat de cilinderinhoud 125cc of meer is, is het niet mogelijk om op de openbare weg te rijden met een bromfiets klasse 2 registratie. Het is alleen voor concurrentie gebruik.
*Wat betreft de installatie van een opboorkit
De krukas ondergaat een grotere torsie en doorbuiging door de aanzienlijke toename van het motorvermogen en koppel met de SP Mukawa Bore Up Kit.
SP Mukawa adviseert tegelijkertijd een krukassteunadapter te monteren om de belasting op de krukas te verminderen.
De Crankshaft Support Adaptor voegt kogellagers toe aan het uiteinde van de vliegwielzijde van de krukas om verdraaiing en doorbuiging te verminderen en de duurzaamheid van de krukas te vergroten.
Krukassteunadapter voor GROM (JC92) (onderdeelnr. 01-10-0149)
*Bij de installatie van de S-stage opboorset, sportnokkenassen en FI-CON TIPE-e moeten tegelijkertijd de "High Capacity Injectors (G1)" (onderdeelnr. 00-00-0487) worden geïnstalleerd.
*Er is een geval dat er een specificatiewijziging van de grondstof is door het gemak van de fabrikant. Begrijp alsjeblieft.
*Afhankelijk van de partij kunt u het product ontvangen met de oude prijs en etiket met de oude JAN-code van vóór de prijswijziging. Wees je hiervan bewust.
Bore Diameter: 54mm
Stroke: 63.1mm (stock)
Compression ratio: 11.2: 1
*When S-stage Big Bore Kit is installed, FI-CON TYPE-e (Injection Controller) must be installed at the same time.
For competition use only.
*Related to the installation of a big bore kit
The crankshaft is subjected to increased torsion and deflection due to the significant increase in engine power and torque caused by the SP Takegawa big bore kit.
SP TAKEGAWA recommends to install crankshaft support adapter at the same time to reduce the load on the crankshaft.
The Crankshaft Support Adaptor adds ball bearing support to the end of the flywheel side of the crankshaft to reduce twisting and deflection and to increase the durability of the crankshaft.
Crankshaft Support Adapter for GROM (JC92) (Part No: 01-10-0149)
*When installing the S-stage Big Bore Kit, Sports Camshaft, or FI-CON TIPE-e, be sure to use the "High Capacity Injectors (G1) (Part No.: 00-00-00-0487) " must be installed at the same time.
*There may be changes in product specifications due to the manufacturer's reasons.
*Depending on the lot, the product may be delivered with the old price and label with the old JAN code before the price change.