■10 mm naar beneden
Hoeveelheid]2st
[specs]
Montageplaats : 330mm
Veervoorspanning : 5-staps aanpassing
Diameter van het montagegat : Bovenste Φ10 / onderste Φ10
*Wanneer dit product is gemonteerd, moeten de voorvorken tegelijkertijd 7 mm worden uitgeschoven om het voertuig tijdens het rijden in evenwicht te houden.
*Het maximale uitsteeksel van de voorvorken mag niet meer dan 7 mm bedragen. Als het maximale uitsteeksel wordt overschreden, kunnen de voorvorken niet aan de bovenbrug en de stuurpen worden bevestigd. Let op.
*Wanneer dit product is gemonteerd, wordt de afstand tussen de geluiddemper en de grond kleiner. Bij het nemen van bochten of hobbels kan de uitlaatdemper in contact komen met de grond.
*De fabriekszijstandaard kan nog steeds worden gebruikt met dit product. Houd er echter rekening mee dat het voertuig anders wordt gekanteld dan bij de originele standaard.
*Andere kleuren kunnen in de afbeelding worden opgenomen.
*Er is een geval dat er een specificatiewijziging van de grondstof is door het gemak van de fabrikant. Begrijp alsjeblieft.
*Afhankelijk van de partij kunt u het product ontvangen met de oude prijs en etiket met de oude JAN-code van vóór de prijswijziging. Wees je hiervan bewust.
■10mm down
[Quantity] 2 pieces
[Specification]
・Mounting pitch: 330mm
・Spring preload: 5-way adjustment
・Mounting hole diameter: Upper Φ10 / Lower Φ10
*When this product is installed, the front forks must be extended up to 7mm in order to balance the bike body when driving.
*The maximum protrusion of the front fork is 7mm or less.If more than the maximum protrusion is performed, the front forks cannot be secured to the top bridge and steering stem.
*When this product is installed, the distance between the exhaust and the ground will be closer.The exhaust may come in contact with the ground when passing through curves, bumps.
*The stock side stand can be used without modification even when this product is installed.However, please note that this will change the tilt of the bike compared to stock.
*The image contains other colors.
*There may be changes in product specifications due to the manufacturer's reasons.
*Depending on the lot, the product may be delivered with the old price and label with the old JAN code before the price change.