spoel diameter : Φ14-18mm* aanbevolen diameter 18mm
Opheffingshoogte : 270-345mm (5 stappen)
Compatibele armbreedtes : Ca. 260-400 mm (traploze aanpassing)
draagvermogen : 200kg
U-vormige klembevestiging inbegrepen
*Een zwenkarmspoel met een uitsparingdiameter van ø 18 moet apart worden aangeschaft.
*Kan niet worden gebruikt op spoelen met een holle diameter van Φ 18 of meer.
*Spoelen met een uitsparingsdiameter van minder dan Φ 18 zullen niet voldoende klemmen.
*De veerwerking van de klemmen is moeilijk terug te brengen door ouderdomsverslechtering. Vervanging wordt aanbevolen.
*De hoogte van dit product moet zodanig worden ingesteld dat de achterband iets omhoog staat. Als de standaard te hoog is, is hij moeilijk op te hangen en instabiel.
*Kan niet worden gebruikt voor zwenkarmen met verschillende niveaus aan beide zijden.
*Er is een geval dat er een specificatiewijziging van de grondstof is door het gemak van de fabrikant. Begrijp alsjeblieft.
Spool diameter: Φ14-18mm *Recommended diameter 18mm
Lift up high: 270-345mm (5 steps)
Supported swingarm widths: Approx. 260-400mm (full adjustable)
Load capacity: 200kg
U-shaped clamp attachment included
*It is necessary to separately purchase a swingarm spool with a concave diameter of Φ18.
*Cannot be used for spools with a concave diameter of Φ18 or larger.
*The clamping function will not be fully demonstrated for spools with a concave diameter of Φ18 or less.
*The spring effect of the clamps becomes less likely to return over time.In that case, we recommend replacement.
*The height of this product should be adjusted so that the rear tire floats a little.If it is too high, the stand will be unstable and difficult to hang.
*Cannot be used with swingarms that are different from each other on the left and right sides.
*There may be changes in product specifications due to the manufacturer's reasons.