zonder lamphuis
Nominale spanning : DC12V
elektriciteitsverbruik : Groot licht 30W / Klein licht 30W
LED : CREE XLamp XP-L LED's
kleurtemperatuur : 3000K
heldere kleur : kleur van de halogeenlamp
Compatibel origineel koplamp onderdeelnummer : 33120-MAZ-003
*De koplamp moet apart worden aangeschaft.
*Installeer het product op de juiste wijze volgens de gebruiksaanwijzing. Een onjuiste installatie kan leiden tot brand of een storing.
*Voor de installatie moet u de aansluitkabel aan de minzijde van de accu loskoppelen en ervoor zorgen dat de sleutel UIT staat.
*Raak de LED-chip niet aan en maak hem niet vuil. De LED-lamp wordt geleverd met een acryldopje met een verzegeling. Nadat de dop en de afdichting zijn verwijderd, wordt eventuele schade aan de LED-lamp door vuil niet gedekt door de garantie, dus ga voorzichtig te werk.
*Aangezien dit product een precisie-instrument is, gelieve er voorzichtig mee om te gaan. Laat het product niet vallen en trek niet met geweld aan de bedrading. Onjuist gebruik kan leiden tot storingen, letsel, brandwonden of ernstige ongelukken met mensenlevens. Bovendien kunnen vonken, slechte isolatie of kortsluiting een defect aan het product of een brand in het voertuig veroorzaken.
*Demonteer of wijzig dit product op geen enkele manier. Gedemonteerde of gewijzigde producten vallen niet onder de garantie.
*Kijk niet direct naar het LED-licht in de koplamp als deze brandt. Het kan een visuele beperking veroorzaken.
*Spetter geen water op de lens terwijl het licht aan is of direct nadat het is uitgeschakeld. Plotselinge temperatuurveranderingen kunnen leiden tot schade aan de lens of de LED-lamp. Raak bovendien de LED-lamp zelf niet aan, de ventilatorbevestiging blijft aan de achterzijde en de regeleenheid, omdat deze heet worden.
*Dit product is alleen voor motorfietsen en kan niet worden gebruikt voor auto's. Het product voor auto's wordt apart verkocht.
*Niet bedekken met papier of doek en niet aansteken in de buurt van ontvlambare materialen. Het kan een brand of abnormale opwarming veroorzaken. Steek de lamp niet aan in de buurt van brandbare of ontvlambare materialen zoals ontvlambare spray of verdunner.
*Monteer niet aan de koplamp als deze brandt. Het kan storingen of brandwonden veroorzaken.
*Dit product is waterdicht voor het dagelijks leven, maar niet volledig waterdicht. Maak de koppeling die uit de controllerunit komt waterdicht met vinyltape, zelfklevende tape of breeuwmiddel. Maak het product niet meer dan nodig nat met water.
*Bij het wassen van een auto met een hogedrukreiniger mag de hogedrukreiniger dit product niet direct raken.
*Laat de LED-lamp of de regeleenheid niet vallen en geef ze geen sterke schok. Het kan niet alleen leiden tot schade, verslechtering van de prestaties en verkorting van de levensduur, maar ook tot letsel.
*Breng bij de montage van de LED-lamp het meegeleverde siliconenvet aan op de plaatsen die worden aangegeven door de vetmerken in de gebruiksaanwijzing.
*Dek de waterdichte ventilator niet af. Zorg ervoor dat er voldoende ruimte achter de ventilator is om de lucht te laten stromen.
*Gebruik een schroefvergrendeling om te voorkomen dat de schroeven loskomen. Draai de schroeven regelmatig vast.
*Installatie vereist gespecialiseerde kennis en vaardigheden. Laat het doen bij een aangewezen onderhoudswerkplaats met een vakbekwame monteur.
*Zorg ervoor dat u de optische as voor gebruik aanpast. Dit product kan het zicht op tegenliggers belemmeren en verkeersongevallen veroorzaken. Voor details verwijzen wij naar de veiligheidsnormen voor wegvoertuigen.
*De installatie van dit product kan de garantie van de voertuigfabrikant ongeldig maken.
*Protec is niet verantwoordelijk voor schade veroorzaakt door het gebruik van dit product, zoals storingen of ongelukken. Daarnaast is Protec niet verantwoordelijk voor eventuele arbeidskosten voor verwijdering en installatie of andere kosten die tijdens de reparatie worden gemaakt. Begrijpt u het alstublieft van tevoren.
*Als u een afwijking voelt tijdens de installatie of het gebruik, neem dan contact op met uw dealer of Protec Service afdeling.
*Er is een geval dat er een specificatiewijziging van de grondstof is door het gemak van de fabrikant. Begrijp alsjeblieft.
Without any lighting
Rated Voltage: DC12V
Power consumption: Hi beam 30W / Lo beam 30W
LED: CREE XLamp XP-L LEDs
Color Temperature: 3000K
Luminescence Color: halogen bulb color
Compatible stock headlight part number: 33120-MAZ-003
*Please purchase the stock headlight separately.
*Install the product correctly according to the instruction manual.Improper installation may result in fire or equipment damage.
*Before installation, be sure to disconnect the terminal cord on the minus side of the battery and confirm that the key is OFF.
*Please do not touch or get the LED chip dirty.Dirt can cause the LED chip to burn due to heat being built-up.The LED bulb comes with an acrylic cap with a sealing seal.
*Please handle this product with care as it is a precision instrument.Do not drop the product or pull the wires forcibly.Improper handling may cause malfunction, injury, burns, or serious accidents that may result in death.In addition, sparks, poor insulation, or short-circuiting may cause a failure of the product or a fire in the vehicle.
*Do not disassemble or modify this product in any way.Products that have been disassembled or modified are not covered by warranty.
*Do not look directly at the LED light when it is on.It can cause visual impairment.
*Do not splash water on the lens while the light is on or immediately after it is turned off.Sudden temperature change may cause damage to the lens or LED bulb.In addition, please do not touch the LED bulb itself, the heat sink behind it, and the controller unit because they get to the high temperature.
*This product is for motorcycles only, so cannot be used on four-wheeled vehicles.This product is not for use on automobiles.
*Do not cover with paper or cloth and do not light near flammable materials.Failure to do so may result in fire or abnormal heating.Also, do not light near flammable items such as flammable spray, thinner, etc. or items that may ignite.
*Do not install to the headlight with the light on.Failure to do so may result in malfunction or burns.
*This product is waterproof for daily life, but it is not completely waterproof.Wrap the coupler coming out of the controller unit with vinyl tape or self-bonding tape, or use caulking agent to waterproof it.Avoid wetting the product with more water than necessary.
*When washing a vehicle with a high pressure washer, please do not let the high pressure wash directly hit this product.
*Please do not drop the LED bulb or controller unit, or give it a strong shock.It not only causes breakage, deterioration of performance and shortening of service life, but also causes injury.
*When assembling the LED bulb, be sure to apply the supplied silicon grease to the areas indicated by the grease marks in the instruction manual.
*Do not cover up the waterproof fan.Make sure that there is enough space behind the fan for the sucked air to flow.
*Use a thread locker to prevent loosening of the threaded part.Periodic retightening is also recommended.
*Installation requires expertise and skill.Please have it done at a designated maintenance facility with skilled mechanics.
*Please adjust the optical axis before use.It may obstruct the view of oncoming vehicles and cause traffic accidents.
*PROTEC is not responsible for any damage or accident caused by the use of this product.Protec will not be responsible for any labor charges or other costs incurred during repair.
*If you feel any abnormality during installation or use, please contact your dealer or PROTEC service department.
*There may be changes in product specifications due to the manufacturer's reasons.