Dit is een dikke dubbele zitting die voor alle carburateur/FI-modellen op de standaard zitkuip past..
De breedte van het zadeloppervlak is breder dan het standaard zadel om het rijcomfort te verbeteren, en het deel waar u uw voeten neerzet is smaller en minder hoekig om dezelfde voet te krijgen als het standaard zadel..
Hoe hoger de zitpositie, hoe losser de kniebuiging en hoe dichter de rijhouding bij een staande houding is, waardoor de belasting van de heupen naar de trede wordt overgebracht..
Door het verhogen van de opstapbelasting wordt de belasting op de billen verminderd en is het gemakkelijker om het voertuig met het opstapje onder controle te houden..
Het is een stoel die lange tochten comfortabeler en aangenamer maakt..
Er wordt gebruik gemaakt van een injectiespons die in de mal wordt gestookt..
De demping is goed en gaat niet achteruit in de loop van de tijd, dus u kunt er lang mee doorwerken..
Kenmerken
Het hele leer is effen zwart met witte biezen in de middennaad..
Het is B-type dat een steeklijn een boog in het midden trekt en naar beneden valt..
Montage
(De demper van de stoel moet worden verplaatst van de fabrieksstoel voor installatie op het voertuig..
Installeer de bevestigde houder aan de kant van de gastank en bevestig de achterkant met de bouten van de stoel en de stoel..
Kan gebruikt worden met voorraadgrijperails en K&H-achterspatborden..
Bij gebruik van de versnellingsbak van Y is het noodzakelijk om de montagebeugel ondersteboven te monteren..
This is a thick double seat that can fit the stock seat cowl on all years of carburetor / FI models.
The width of the seat surface is wider than the stock seat to improve the ride comfort, and the part where you put your feet down is narrower and less angular to achieve the same footing as the stock seat.
The higher the seating position, the looser the bend of the knees becomes, and the riding posture becomes closer to the standing posture, and the load of the buttocks is transferred to the step.
By increasing the step load, the load on the buttocks is reduced and it is easier to control the vehicle with the step.
It is a seat that makes long touring more comfortable and enjoyable.
The injection sponge is fired in the mold.
The cushioning is good and does not deteriorate over time, so you can use it for a long time.
■Features
The entire leather is plain black, with white piping at the center seam.
The stitching line arcs downward in Type B.
■Mounting
It is necessary to transfer the seat damper from the stock seat for installation to the vehicle.
Install the attached bracket on the gasoline tank side, and fix the rear side with the stock seat bolts just like the stock seat.
It can be used with stock grab rails or K & H rear fenders.
When using with Y's gear carrier, it is necessary to attach the mounting bracket upside down.