kleur : Matzwart (Alumiet)
basismaterialen : aluminium (Al)
type : basistype
gewicht : Ongeveer 190g
formaat : 284X136mm
aantal items, enz. ingevoerd : met een stuk
*Wanneer dit product is geïnstalleerd, kan de lengte van de kentekenplaatbout onvoldoende zijn vanwege de dikte van het product (ongeveer 3 mm). Zorg ervoor dat u bouten gebruikt die lang genoeg zijn en die kunnen worden aangedraaid.
*Afhankelijk van de richting waarin u aan de haken trekt of de banden aanspant, bestaat de mogelijkheid dat het product of de nummerplaat op de carrosserie van het voertuig wordt beschadigd. Dit product is ontworpen om te worden gebruikt in het kader van het gezond verstand.
*Dit product is ontworpen om het gewicht van het spatbord te verminderen. Kan niet tegelijk met de spatbordloze kit worden geïnstalleerd, omdat deze beschadigd kan raken.
*Let op dat u de riem niet aan de lichten doet.
*Als u tijdens het gebruik een afwijking in het product voelt, stop dan onmiddellijk met het gebruik van het product.
*Afhankelijk van de richting waarin het product wordt gemonteerd, kan de rand van het product een bocht (rand) hebben. Dit is te wijten aan de productiemethode en is geen defect.
*Sommige voertuigen zijn alleen sterk genoeg om het kenteken vast te houden, dus u kunt niet meer lading aan de haak hangen dan nodig is. Zorg ervoor dat de belasting aan beide zijden van de haak gelijk is.
*Wij zijn niet verantwoordelijk voor schade aan de nummerplaatbodem aan de carrosseriezijde als gevolg van belasting.
*Bouten en sluitringen zijn niet inbegrepen in het product.
Color: Matte black (Anodized)
Material: Aluminum
Type: base type
Weight: Approx. 190g
Size: 284 x 136mm
Quantity: Containing 1 piece
*When this product is installed, the length of the license plate bolt may be insufficient due to the thickness of the product (about 3mm).Be sure to use bolts of sufficient length and parts that can be tightened.
*Depending on the direction in which the hooks are pulled or how the bands are tightened, the product or the number base on the vehicle body may be damaged.This product is intended to be used within the scope of common sense.
*The part of the product that has been cut out for the purpose of weight reduction cannot be used as a hook.The fender eliminator kit cannot be installed at the same time as it may be damaged.
*Please be careful not to put the belt on the lights.
*If you feel any abnormality in the product during use, stop using the product immediately.
*Depending on the direction in which the product is mounted, the edge of the product may be turned (edge).This is due to the manufacturing method and is not a defect.
*Some vehicle bodies are only strong enough to hold the license plate, so you cannot put more load on the hooks than necessary.Please make sure that the load is evenly applied to both sides when hooking.
*We are not responsible for any damage to the license plate base on the body side due to load.
*Bolts and washers are not included in the product.