[set bevat].
Eén elk aan de rechter- en linkerzijde van de spiegel.
Montageschroevenset
Materiaal.
Harslichaam
[bereik van de beweging]
180 graden links en rechts
120 graden heen en weer
[spiegelgrootte]
Effectieve hoogte en breedte : 78mm
Effectieve breedte : 148mm
[Schachtgrootte]
Ca. 100 mm aan het bewegende deel (23 mm tussen de schroeven van het variabele deel + 19 mm van de basis naar het schroefdeel)
*Afhankelijk van de inbouwpositie van de spiegel, het motortype en de rijeigenschappen van het voertuig kan het moeilijk zijn om de achterkant van het voertuig te zien bij het rijden met snelheden boven de wettelijke maximumsnelheid die door het ministerie van Land, Infrastructuur, Transport en Toerisme op de openbare weg is vastgesteld.
*Installatieplaats: Aangezien dit product een grote veelzijdigheid heeft, gelieve de volgende voorwaarden te controleren voor de installatie en na te gaan of het past in uw auto.
[installatievoorschriften]
(1) De voorraadspiegel moet worden bevestigd met twee 6 mm bouten.
(2) De bevestigingssteek van de bevestigingsbouten moet 20 mm (minimum) tot 61 mm (maximum) bedragen.
(3) De montagedelen zijn parallel en 70 mm lang en 31 mm breed.
*Bereid de juiste bouten voor uw automodel zelf voor. Houd er rekening mee dat de schroefafstand voor sommige automodellen, zoals buitenlandse auto's, anders is en dat deze misschien niet kan worden geïnstalleerd, zelfs niet als de schroefdiameter dezelfde is.
*Voertuigen voor algemeen gebruik (controleer de montagemaat op compatibiliteit)
[Set components]
・One each on the right side and left side of the mirror
・Mounting screw set
[Material]
・Resin body
[Range of motion]
・180 degrees left / right
・120 degrees front and back
[Mirror size]
・Effective height and width: 78mm
・Effective width: 148mm
[Shaft size]
・Approx. 100mm to the moving part (23mm between the screws of the variable part + 19mm from the base to the screw part)
*Installation position: This product has a wide range of versatility, so please check the following conditions before installation and consider whether it fits your vehicle.
[installation requirements]
(1) The stock mirror must be fixed with two 6mm bolts.
(2) The fixing pitch of the mounting bolts must be 20mm (minimum) to 61mm (maximum).
(3) The mounting portions must be parallel and 70 mm in length and 31 mm in width.
*In some cases, the length of the bolts supplied may not fit some models, so please purchase bolts separately.Please note that the screw pitch is different for some vehicles such as foreign vehicles and it may not be able to be installed even if the screw diameter is the same.
*Universal cowl vehicles (Please check the mount size for compatibility)