[Productbeschrijving]
Geval lichaam 1 set
5 Torxbouten (inclusief 1 reservebout)
Schokdemper 10 stuks (inclusief 2 reserveonderdelen)
5 O-ringen (inclusief 1 reserve)
[Grootte]
・Body : 82X162X11mm
Pakket : 190X125X23mm
Lichaamsgewicht : 19g
*De Solid Bumper voor iPhone XS MAX kan worden opgeladen met Qi-compatibele draadloze laders.
*Opladen is niet mogelijk als het aluminium paneel aan de bumper is bevestigd.
*Laad uw iPhone op met de echte Lightning kabel die bij uw iPhone wordt geleverd.
*Door de dikte van de bumper wordt de iPhone 1,5 mm gescheiden van de draadloze Qi-lader. Het is mogelijk dat het laadrendement iets lager is dan de staat waarin het zich bevindt.
*De oplaadtijd is ook afhankelijk van het uitgangsvermogen en de adapterspanning van de draadloze Qi-lader die u gebruikt.
*Omdat dit product is gemaakt van aluminium, kan het radiogolven tot op zekere hoogte blokkeren, en de prestaties van de ontvangen radiogolven kunnen iets minder goed zijn.
*Het kan moeilijk zijn om het signaal te ontvangen op de plaats waar het signaal niet goed is. Als u een normaal signaal ontvangt, is er geen probleem.
Lees en begrijp het volgende voordat u een reservering maakt.
*Producten die de achterkant van de iPhone bedekken, zoals massieve of aluminium panelen, kunnen niet worden gebruikt met Qi-compatibele draadloze laders.
*Omdat dit product van aluminium is gemaakt, wordt de radiogolf aan de achterkant van het lichaam geblokkeerd. Het is mogelijk dat de prestaties van de ontvangst van de radiogolf iets minder goed zijn.
*Wat de 4X4 MIMO betreft, hebben we het nog niet bevestigd omdat deze nog niet in dienst is in Japan, maar we hebben het ontwerp gemaakt om de antennedraad zo veel mogelijk bloot te leggen.
*Houd er rekening mee dat Guild Design niet verantwoordelijk is voor schade aan de iPhone, storingen, verlies of verlies van gegevens.
*Dit product is ontworpen om te voorkomen dat de iPhone in contact komt met het hoesje door het gebruik van schokabsorberende hars, maar het is niet ontworpen om de iPhone volledig te beschermen tegen krassen.
*Houd er rekening mee dat Guild Design niet verantwoordelijk is voor schade aan het lichaam van de iPhone die wordt veroorzaakt door de installatie van dit product.
*De productspecificaties, het uiterlijk en de gebundelde artikelen kunnen zonder voorafgaande kennisgeving worden gewijzigd.
*Het is mogelijk dat u geen gebruik kunt maken van externe opladers.
*Houd er rekening mee dat andere films dan die welke door Guild Design worden aanbevolen, defecten kunnen veroorzaken zoals zweven.
*Het kan moeilijk zijn om het signaal te ontvangen op de plaats waar het signaal niet goed is. Als u een normaal signaal ontvangt, is er geen probleem.
*Door de eigenschappen van het anodiseerproces is het moeilijk om voor elke partij dezelfde kleur te produceren. We proberen zoveel mogelijk dezelfde kleur te behouden, maar door het anodiseringsproces kan de kleur van partij tot partij verschillen.
*Omdat dit product geanodiseerd is, is de plaats die het contactpunt wordt genoemd waar de elektrische stroom doorheen gaat niet gekleurd. Er zijn twee punten aan de binnenkant van de koffer die niet gekleurd zijn, maar dit is geen tekortkoming in de verwerking.
*Hoewel we ons best doen om de productfoto zo dicht mogelijk bij de kleur van het echte werk te maken, is er een geval dat de verandering van de kleur wordt gevoeld door de monitor en de kleurinstelling van de computer die de klant gebruikt, de binnenverlichting en het zonlicht.
[Product Components]
・Case body 1 set
・5 Torx bolts (including 1 spare bolt)
・Shock absorber 10 pieces (including 2 spare pieces)
・5 O-rings (including 1 spare)
[Size]
・Body: 82 x 162 x 11mm
・Package: 190 x 125 x 23mm
Body weight: 19g
*The Solid Bumper for iPhone XS MAX can be charged with Qi compatible wireless charger.
*Charging is not possible when the aluminum panel is attached to the bumper.
*Please charge with the stock Lightning cable that comes with your iPhone.
*The thickness of the bumper will separate your iPhone from the Qi wireless charger by 1.5mm.The charging efficiency may be slightly lower than that of the state where it is adhered.
*Charging time may vary depending on the output wattage and adapter voltage of your Qi wireless charger.
*Because this product is made of aluminum, it may block radio waves to some extent, and the performance of receiving radio waves may be slightly inferior.
*It may be difficult to receive the signal in the place where the signal condition is not good.If you are receiving a normal signal, there is no problem.
[Please read and understand the following before making a reservation]
*Qi compatible wireless chargers cannot be used with products that cover the back of the iPhone such as solid or aluminum panels.
*Because this product is made of aluminum, radio waves will be blocked from the back of the main body.There is a possibility that the performance of receiving radio waves is slightly inferior.
*4 x 4 MIMO is not yet available in Japan, so we have not confirmed it yet, but we have designed to expose the antenna wire as much as possible.
*This product is not designed to completely protect your iPhone from shocks.GILD Design is not responsible for any damage to the iPhone, malfunction, loss, or loss of data.
*This product is designed to prevent the iPhone from contacting with the case by using shock-absorbing resin, but it is not designed to completely protect the iPhone from scratches.
*GILD Design is not responsible for any damage to the iPhone caused by installing this product.
*The specifications, appearance, and included products of the product are subject to change without notice.
*You may not be able to use aftermarket chargers.
*Films other than those recommended by Gild Design may cause problems such as floating.
*It may be difficult to receive the signal in the place where the signal condition is not good.If you are receiving a normal signal, there is no problem.
*Due to the characteristics of the anodizing process, it is difficult to finish the same color for each lot.We try to keep the same color as much as possible, but due to the anodizing process, the color may vary from lot to lot.
*Because this product is anodized, the contact point where the electric current passes through is not colored.There are two points on the inside of the case that are not colored, but it is not a defect in processing.
*Although we have made every effort to make the product photos as close as possible to the actual color of the product, you may notice a change in color depending on your computer monitor, color settings, indoor lighting, sunlight, and other factors.