Deze stoel is voor CB1100RS/EX na 2017..
De helling, de breedte, de hoogte en de vorm van de stoel zijn beoordeeld in vergelijking met de standaardstoel..
Voldoende dikte en breedte van de spons voor zowel de bestuurders- als de passagierszijde en de helling van het zadel.. Aanbevolen voor tandemtours, en voor solotours, maakt het ook makkelijker om bagage in te laden..
De breedte van het zitgedeelte is tot op zekere hoogte beveiligd om het rijcomfort te verbeteren, en de breedte van het gedeelte waar de benen zijn neergelaten is versmald, zodat het een goede voet aan de grond heeft..
Er wordt gebruik gemaakt van een injectiespons die in de mal wordt gestookt.. De demping is goed en gaat niet achteruit in de loop van de tijd, dus u kunt er lang mee doorwerken..
[kenmerken]
《Sheet height》
CB1100RS: 785mm (voorraad) =>795mm
CB1100EX:780mm(stock)=>790mm
Gewoon zwarte lederen zadelrol op de zitting. Naaien op de naadlijn, B-type met de lijn die naar beneden valt in het midden.
Tandemgordel met bouten als standaarduitrusting.
Het sleutelslotsysteem is hetzelfde als de echte stoel..
Kan gebruikt worden met een echte drager en topbox..
De hardheid van de spons is ingesteld op de standaardinstelling voor het gewicht van 60 tot 80 kg..
This seat is for CB1100RS / EX after 2017.
The slope, width, height and shape of the seat have been reviewed compared with the original seat.
The thickness and width of the sponge is sufficient for both the rider and passenger sides, and the slope of the seat surface has been revised.It is recommended for pillion touring, and for solo touring, it makes it easier to carry luggage.
The width of the seating area is secured to a certain extent to improve the riding comfort, and the width of the area where the legs are lowered is narrowed so that the legs can fit well.
The injection sponge is fired in the mold.The cushioning is good and does not deteriorate over time, so you can use it for a long time.
[Features]
<>
CB1100RS: 785mm (stock) to 795mm
CB1100EX: 780mm (stock) to 790mm
・Plain black leather tack roll on the seat.Sewing lines are stitched, B type where the lines fall down in the middle.
・The pillion belt is bolted on as standard equipment.
・The key lock system is the same as the original seat.
・This product can be used with stock carrier and top box.
The hardness of the sponge is set to the standard for the weight of 60-80kg.