[Lichaamsgrootte] 75.5X148.1X10.7mm
[Lichaamsgewicht] 20g
[Productdetails]
Case Body 1 set, Torx bolt 5 boeken (Voorlopige 1 pc inbegrepen)
10 schokdempers (voorlopig Hoeveelheid: 2st. Set inbegrepen), O-ring Hoeveelheid: 5st. (Inclusief reserve 1)
* iPhone-compatibele solide bumpers kunnen worden opgeladen met Qi-compatibele draadloze oplader.
* Opladen is onmogelijk als het aluminium paneel op de bumper is bevestigd.
* Gelieve op te laden met een echte bliksem kabel meegeleverd met de iPhone.
* Ongeveer 1,5 mm dikke bumper bumper is gescheiden van Qi-compatibele draadloze oplader. De oplaadefficiëntie is mogelijk iets slechter dan in de staat van dichtbij.
* Afhankelijk van het uitgangsvermogen van de Qi-compatibele draadloze oplader die wordt gebruikt, zal de oplaadtijd ook verschillen afhankelijk van de spanning van de adapter.
* Omdat dit product vanwege de aard van het product van aluminium is gemaakt, zal het de radiogolf enigszins afschermen en kunnen de ontvangst van radiogolven enigszins inferieur zijn.
* Op de plaats waar de radio niet goed is, kunnen radiogolven moeilijk te ontvangen zijn. Als u normale radiogolven ontvangt, is er geen probleem.
[Bevestig het volgende en bevestig het van tevoren en bedankt voor uw reservering]
* Producten die de achterkant van de iPhone bedekken, zoals vaste en aluminium panelen, kunnen geen Qi-compatibele draadloze oplader gebruiken.
* Omdat dit product vanwege de eigenschappen van het product van aluminium is gemaakt, blokkeren radiogolven de achterkant van het hoofdgedeelte. De prestaties voor het ontvangen van radiogolven kunnen enigszins inferieur zijn.
* Dit product is niet gemaakt om de iPhone volledig te beschermen tegen schokken, enz.
* Wij zijn niet verantwoordelijk voor eventuele schade, defecten, verlies, verlies van gegevens enz. Op het hoofdgedeelte van de iPhone. Houd er rekening mee dat we geen enkele verantwoordelijkheid kunnen nemen.
* Dit product is zo ontworpen dat de hoes niet in contact komt met de iPhone vanwege schokabsorberende hars, maar het is niet gemaakt met het doel om de iPhone volledig te beschermen tegen krassen.
* We zijn niet verantwoordelijk voor eventuele krassen op de iPhone-hoofdeenheid als gevolg van de installatie van dit product, dus begrijp dit van tevoren.
* Productspecificaties / uiterlijk / gebundelde artikelen kunnen zonder voorafgaande kennisgeving worden gewijzigd.
* Externe oplader enz. Mag niet worden gebruikt.
* Weest u er alstublieft van op de hoogte dat er problemen kunnen optreden zoals zweven voor andere films dan die welke door ons zijn aanbevolen.
* Op de plaats waar de radio niet goed is, kunnen radiogolven moeilijk te ontvangen zijn. Als u normale radiogolven ontvangt, is er geen probleem.
* Door de eigenschappen van alumietbehandeling is het moeilijk om in elke partij dezelfde kleur te krijgen. De inspanning wordt gedaan om zoveel mogelijk af te werken met dezelfde kleur, maar door de behandeling met alumiet zullen er variaties in de kleur optreden door lot.
* Aangezien dit product wordt blootgesteld aan alumiet, is de plaats die het contact wordt genoemd en waardoor de stroom wordt doorgegeven, niet gekleurd. In dit geval zijn er twee plaatsen zonder kleur maar dit is geen verwerkingsfout.
* Productfoto's proberen het zo dicht mogelijk bij de echte kleur mogelijk te maken, maar kleurverandering kan worden gevoeld door de monitor van de pc die u gebruikt, kleurinstelling, binnenverlichting, zonlicht enz...
[Body size] 75.5 x 148.1 x 10.7mm
[Body weight] 20g
[Product Components]
Case body 1set, Torx bolt 5 pcs (including 1 spare)
Shock absorber 10 pieces (including 2 spare pieces), O-ring 5 pieces (including 1 spare piece)
*The solid bumper for iPhoneX can be charged with Qi compatible wireless charger.
*Charging is not possible when the aluminum panel is attached to the bumper.
*Please charge with the stock Lightning cable that comes with your iPhone.
*The thickness of the bumper will separate your iPhone from the Qi wireless charger by 1.5mm.The charging efficiency may be slightly lower than that of the state where it is adhered.
*Charging time may vary depending on the output wattage and adapter voltage of your Qi wireless charger.
*Because this product is made of aluminum, it may block radio waves to some extent, and the performance of receiving radio waves may be slightly inferior.
*It may be difficult to receive the signal in the place where the signal condition is not good.If you are receiving a normal signal, there is no problem.
[Please read and understand the following before making a reservation]
*Qi compatible wireless chargers cannot be used with products that cover the back of the iPhone such as solid or aluminum panels.
*Because this product is made of aluminum, radio waves will be blocked from the back of the main body.There is a possibility that the performance of receiving radio waves is slightly inferior.
*This product is not designed to completely protect your iPhone from shocks.
*We are not responsible for any damage to the iPhone, failure, loss, or loss of data.
*This product is designed to prevent the iPhone from contacting with the case by using shock-absorbing resin, but it is not designed to completely protect the iPhone from scratches.
*Please understand beforehand that we cannot assume any responsibility for any damage to iPhone caused by installing this product.
*The specifications, appearance, and included products of the product are subject to change without notice.
*You may not be able to use aftermarket chargers.
*Films other than those recommended by us may cause problems such as lifting.
*It may be difficult to receive the signal in the place where the signal condition is not good.If you are receiving a normal signal, there is no problem.
*Due to the characteristics of the anodizing process, it is difficult to finish the same color for each lot.We try to keep the same color as much as possible, but due to the anodizing process, the color may vary from lot to lot.
*Because this product is anodized, the contact point where the electric current passes through is not colored.There are two points on the inside of the case that are not colored, but it is not a defect in processing.
*Although we have made every effort to make the product photos as close as possible to the actual color of the product, you may notice a change in color depending on your computer monitor, color settings, indoor lighting, sunlight, and other factors.