[specs]
koppelingsgewicht : 8 stuks (4 stuks voor normaal)
Versterkte koppelingsveer geïnstalleerd
Aanbevolen boorverplaatsing : 49-106cc
Toelaatbare omwentelingssnelheid : MAX12000rpm
Ondersteunt een tijdelijke reductiefactor van 4,058 (17/69T)
[Inhoud van de kit]
20% veerconstante omhoog, Koppelingsgewicht 8 stuks Koppeling assy (reeds geïnstalleerd) X1 set
R carterdeksel pakking X1set
Koppelingsbuitenste pakking X1set
Koppelingsbuitenste deksel X1
Sluitring conus X 1 stuk
Sluitring met klauw X1
Koppelingsborgmoer X 1 stuk
Schroeven voor de buitenste afdekking van de koppeling X4 st.
*23110-GK-010 Gear COMP Primair aangedreven (69T),22121-035-020 Geleidings- en koppelingscentrum,23120-086-020 Gear Primaire aandrijving (17T) reductiegraad wordt gewijzigd van 18/67 (3.722) naar 17/69 (4.05) door het monteren van de bovenstaande onderdelen, het is noodzakelijk om de secundaire reductiegraad te resetten met het tandwiel.
[Specification]
Clutch Weight: 8 pieces (4 pieces for normal)
Reinforced clutch spring installed
Recommended Big Bore Displacement: 49-106cc
Allowable Rotation Speed: MAX12000rpm
Compatible with a temporary reduction ratio of 4.058 (17 / 69T)
[Kit Contents]
・20% Higher spring rate, 8pcs Clutch weight, Clutch Assembly (pre-installed) x 1set
・R crankcase cover gasket x 1set
・Clutch outer cover gasket x 1pcs
・Clutch outer cover x 1
・Lock washer taper x 1pc
・Lock washer with claw x 1pc
・Clutch lock nut x 1pc
・Screws for clutch outer cover x 4pcs
*Parts are required for the 6V MONKEY separately.23110-GK-010 Gear COMP Primary Driven (69T), 22121-035-020 Guide and Clutch Center, 23120-086-020 Gear Primary Drive (17T), By installing the above parts, the primary reduction ratio will change from 18/67 (3.722) to 17/69 (4.05). (4.05), it is necessary to reset the secondary reduction ratio with the sprocket.
*To remove and install the lock nut, use the lock nut wrench (part number: 2939), Universal pulley holder (Part No: 1888),Other universal tools such as torque wrenches and socket wrenches are required.
*There may be changes in product specifications due to the manufacturer's reasons.