・Fuel control for each individual cylinder in a smaller enclosure
Opwarming" brandstofaanpassing (eenheid leest de motortemperatuur af en maakt aanpassingen van de brandstof/timing mogelijk op basis van de aflezing)
・Reduced size from the PCIII USB
・Easy to install
・USB powered from computer;9 volt adapter is no longer needed
・Two-position map-switching function built in
・Can add any Single Pole Single Throw (SPST) switch and toggle between two different fuel maps
・Gear/speed input allows for map adjustment based on gear
・Analog input allows user to install any 0-5 volt sensor
・Build an adjustment table based on analog input such as boost or temperature
・Power Commander V is capable of allowing each cylinder to be mapped individually and for each gear with the gear position input connected
・More tuning ranges than PCIII USB
Verbeterde "versnellingspomp" utility
・For Offroad and ATV, see appropriate catalog under Moose Power Commanders
・Made in the U. S. A.
SECONDARY FUEL MODULE
・Allows for the use of the Dynojet Quick Shifter sensor on eight-injector bikes which provides added fuel control and shifter functionality
Als de ingang van de tandwielpositie is aangesloten op uw PCV, kunt u alle injectoren "per tandwiel" instellen.
・Allows for the adjustment of all eight-injectors
・See application chart for availability
・Single cable connection to the PCV
・Connects to the upper injector rail using OEM connectors
・You can also map each injector separately, giving you up to 48 complete maps
De "basis"-modus maakt het mogelijk om een enkele brandstoftabel te hebben die eenvoudigweg de gevraagde brandstofwissel in zowel de bovenste als de onderste injectormodule op hetzelfde moment plaatst. dezelfde tijd
・Adjust both upper and lower injectors by as much as +250/-100%
De "basis"-modus is de perfecte instelling voor aangepaste motoren die meer brandstof nodig hebben dan vier injectoren kunnen leveren, maar die niet de complexiteit van het in kaart brengen van elke cilinder en elke versnelling afzonderlijk nodig hebben. De "basis"-modus is de perfecte instelling voor aangepaste motoren die meer brandstof nodig hebben dan vier injectoren kunnen leveren, maar die niet de complexiteit van het in kaart brengen van elke cilinder en elke versnelling afzonderlijk nodig hebben.
QUICK SHIFTER EXPANSION MODULE
・The QEM allows the Dynojet Quick Shifter sensor to be used with Power Commander V on bikes that have eight injectors
・Once the sensor is attached you will have full Quick Shifter functionality
・The QEM connects to the upper injectors and then into the PCV
Vertaling.
Brandstofregeling voor elke afzonderlijke cilinder in een kleine behuizing
Opwarming" brandstofaanpassing (een eenheid die de motortemperatuur afleest en aanpassingen van de brandstof/timing op basis van de aflezing mogelijk maakt)
Grootteverkleining van PCIII USB
Gemakkelijk te installeren
USB-voeding via de computer; 9-volt adapter is niet meer nodig
Ingebouwde 2-positie kaartschakelfunctie
Single Pole Single Throw (SPST) schakelaar wordt toegevoegd om te schakelen tussen twee verschillende brandstofkaarten.
Versnellingsbak/snelheidsinput maakt aanpassing van de kaart op basis van de versnelling mogelijk
Met behulp van analoge ingangen kunnen 0-5V-sensoren worden geïnstalleerd.
Maak een aanpassingstabel op basis van analoge ingangen zoals boost of temperatuur
De Power Commander V kan elke cilinder afzonderlijk in kaart brengen..
Meer afstembereik dan PCIII USB
Verbeterde "versnellingspomp" utility
Voor Offroad en ATV verwijzen wij u naar de desbetreffende catalogus van Moose Power Commanders..
Gemaakt in de VS
Secundaire brandstofmodule
Dynojet Quick Shifter Sensor kan worden gebruikt op 8 injectorfietsen om extra brandstofcontrole en shifterfunctie te bieden.
Als de positie-ingang van de tandwielkast op de PCV is aangesloten, kunnen alle injectoren in "tandwielkasten" worden versteld.
Alle 8 injectoren kunnen worden aangepast.
Zie de beschikbare applicatieschema's
Enkele kabelverbinding met PCV
Aansluiten op de bovenste injectorrail met behulp van de OEM-connector
Elke injector kan afzonderlijk in kaart worden gebracht om een kaart van maximaal 48 injectoren te voltooien.
In de "Basic"-modus kan een enkele brandstoftabel worden opgesteld die de gevraagde brandstofwissel tegelijkertijd naar de bovenste en onderste injectormodule voert.
Omhoog / omlaag Injector + 250 / -100
De "basis"-modus is de perfecte instelling voor een aangepaste motor die meer brandstof nodig heeft dan vier injectoren, maar niet de complexiteit van het in kaart brengen van elke cilinder en elke versnelling afzonderlijk.
QUICK SHIFTER EXPANSION MODULE
De QEM maakt het mogelijk om de Dynojet quickshifter sensor te gebruiken met de Power Commander V op motorfietsen met acht injectoren.
Zodra de sensor is geïnstalleerd, kan de volledige functionaliteit van de Quick Shifter worden gebruikt.
QEM wordt aangesloten op de bovenste injector en vervolgens op de PCV.
・Fuel control for each individual cylinder in a smaller enclosure
・Warm-up" fuel adjustment (unit reads engine temp and allows fuel / timing adjustments based on the reading)
・Reduced size from the PCIII USB
・Easy to install
・USB powered from computer; 9 volt adapter is no longer needed
・Two-position map-switching function built in
・It can add any Single Pole Single Throw (SPST) switch and toggle between two different fuel maps
・Gear / speed input allows for map adjustment based on gear
・Analog input allows user to install any 0-5 volt sensor
・Build an adjustment table based on analog input such as boost or temperature
・Power Commander V is capable of allowing each cylinder to be mapped individually and for each gear with the gear position input connected
・More tuning ranges than PCIII USB
・Enhanced “accel pump" utility
・For Offroad and ATV, see appropriate catalog under Moose Power Commanders
・Made in the U.S.A.
SECONDARY FUEL MODULE
・Allows for the use of the Dynojet Quick Shifter sensor on eight-injector bikes which provides added fuel control and shifter functionality
・If gear position input is connected to your PCV, you can adjust all of the injectors on a “per gear" basis
・Allows for the adjustment of all eight-injectors
・See application chart for availability
・Single cable connection to the PCV
・Connects to the upper injector rail using OEM connectors
・You can also map each injector separately, giving you up to 48 complete maps
・The “basic" mode allows you to have a single fuel table that simply puts the requested fuel change in both upper and lower injector modules at the same time
・Adjust both upper and lower injectors by as much as +250 / -100%
・The “basic" mode is the perfect setting for modified engines that require more fuel than four-injectors can provide, but do not need the complexity of mapping each cylinder and each gear separately
QUICK SHIFTER EXPANSION MODULE
・The QEM allows the Dynojet Quick Shifter sensor to be used with Power Commander V on bikes that have eight injectors
・Once the sensor is attached you will have full Quick Shifter functionality
・The QEM connects to the upper injectors and then into the PCV
[Translation]
・Fuel control for each individual cylinder in a small enclosure
・Warm-up fuel adjustment (a unit that reads engine temperature and allows fuel / timing adjustments based on the reading)
・Size reduction from PCIII USB
・Easy to install
・USB supplied from computer; 9 volt adapter is no longer needed
・Built-in 2-position map switching function
・Single Pole Single Throw (SPST) switch is added to switch between two different fuel maps
・Gear / speed input enables gear-based map adjustment
・Using analog inputs, 0-5V sensors can be installed
・Create an adjustment table based on analog inputs such as boost or temperature
・The Power Commander V can map each cylinder individually.
・More tuning range than PCIII USB
・Enhanced "acceleration pump" utility
・For Offroad and ATV, please refer to the appropriate Moose Power Commanders catalog.
・Made in USA
Secondary Fuel Module
・Dynojet Quick Shifter Sensor can be used on 8 injector bikes to provide additional fuel control and shifter function
・If the gear position input is connected to the PCV, all injectors can be adjusted in "gear units"
・All 8 injectors can be adjusted
・See the available application charts
・Single cable connection to PCV
・Connect to the upper injector rail using the OEM connector
・Each injector can be mapped separately to complete a map of up to 48 injectors
・In the "Basic" mode, a single fuel table can be prepared that will feed the requested fuel change to both the upper and lower injector modules simultaneously
・Up / Down Injector + 250 / -100
・The "basic" mode is the perfect setting for a modified engine that requires more fuel than four injectors, but does not require the complexity of mapping each cylinder and each gear separately
QUICK SHIFTER EXPANSION MODULE
・The QEM allows the Dynojet quickshifter sensor to be used with the Power Commander V on motorcycles with eight injectors
・Once the sensor is installed, the full functionality of the Quick Shifter can be used
・QEM is connected to the upper injector, and then to the PCV