[voor de voorkant]
materiaaleigenschappen : Aluminium 2017S (Geanodiseerd)
kleur : zilver
Compatibele remklauwen : brembo 65mm
Compatibele rotoren : Standaard φ310 Dubbele schijf
accessoire : roestvrijstalen bout voor remklauwmontage, 0,5 mm vulstuk
*Alle remklauwsteunen voor 40mm steek zijn ontworpen voor "brembo 40mm gietklauw". 26.5mm offset zit in het midden, dus als u deze gebruikt voor AP of NISSIN remklauw, dan kunt u deze aanpassen met de bijgevoegde vulplaat. (Het komt niet overeen met 6POT remklauw.)
*De meegeleverde vulplaten zijn ook effectief in het corrigeren van productfouten in individuele remklauwen.
*Wanneer u de remklauw of de rotor verwisselt, verandert het contactoppervlak tussen de rotor en het stootkussen. In dit geval moet u het oppervlak van de pad, dat niet in contact komt met de rotor, afschrapen.
*remklauwbout pitch brembo 40mm:P1.5, brembo 65mm:P1.25, NISSIN:P1.25, TOKICO:P1.25
*Kan niet gebruikt worden met brembo 65mm pitch 2PAD remklauwen.
*Het beeld dient alleen ter illustratie.
[for front]
Material: Aluminum 2017S (Anodized)
Color: Silver
Compatible calipers: brembo 65mm
Compatible rotors: Stock Φ310 double disc
Components: Stainless steel bolt for caliper mount, 0.5mm shim
*All caliper supports for 40mm pitch are designed with "brembo 40mm casting caliper".Since the offset is 26.5mm at the center, please adjust with the attached shim when you use it with AP and NISSIN calipers.(Not compatible with 6POT calipers.)
*The supplied shims are also effective in correcting product errors in individual calipers.
*Changing calipers and rotors will change the contact surface between the rotors and pads.In such a case, scrape off the surface of the pad that does not contact the rotor and use it.
*Caliper bolt pitch brembo 40mm: P1.5, brembo 65mm:P1.25, NISSIN:P1.25, TOKICO:P1.25
*Not for use with brembo 65mm pitch 2PAD calipers.
*Images are for reference only.